Gigabyte GA-Z97X-UD5H Intel Mainboard LGA 1150 DDR3 ATX Motherboard

Beschreibung

• Prozessor

  1. Support for Intel^® Core™ i7 processors/Intel^® Core™ i5 processors/Intel^® Core™ i3 processors/Intel^® Pentium^® processors/Intel^® Celeron^® processors in the LGA1150 package
  2. L3 cache varies with CPU

• Chipsatz

  1. Intel^® Z97 Express Chipset

• Arbeitsspeicher

  1. 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
     * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. Dual channel memory architecture
  3. Support for DDR3 3200(O.C.) / 3100(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

• Onboard Grafik

  Integrated Graphics Processor – Intel^® HD Graphics support:

  1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60Hz
  2. 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60Hz
     * The DVI-D port does not support D-Sub connection by adapter.
  3. 1 x HDMI port, supporting a maximum resolution of 4096×2160@24Hz or 2560×1600@60Hz
     * Support for HDMI 1.4a version.
  4. Support for up to 3 displays at the same time
  5. Maximum shared memory of 512MB

• Audio

  1. Realtek^® ALC1150 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF Out

• LAN

  1. 1 x Qualcomm^® Atheros Killer E2201 LAN chip (10/100/1000 Mbit) (LAN1)
  2. 1 x Intel^® GbE LAN phy (10/100/1000 Mbit) (LAN2)
     * Teaming is not supported.

• Erweiterungssteckplätze

  1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
     * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
  2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
     * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.
  3. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
     * The PCIEX4 slot shares bandwidth with the PCIEX8 and PCIEX16 slots. When the PCIEX4 slot is populated, the PCIEX16 slot will operate at up to x8 mode and the PCIEX8 will operate at up to x4 mode.
     * When installing a x8 or above card in the PCIEX4 slot, make sure to set PCIE Slot Configuration in BIOS Setup to x4. (Refer to Chapter 2, "BIOS Setup," "Peripherals," for more information.)
     (The PCIEX16, PCIEX8 and PCIEX4 slots conform to PCI Express 3.0 standard.)
  4. 2 x PCI Express x1 slots
     (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  5. 2 x PCI slots

• Multi-Graphics Technology

  1. Support for 3-Way/2-Way AMD CrossFire™ and 2-Way NVIDIA^® SLI™ Technology

• Storage Interface

  Chipset:

  1. 1 x M.2 PCIe connector
     (Socket 3, M key, type 2242/2260/2280 SATA & PCIe SSD support)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
     (M.2, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed.)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10

  Marvell^® 88SE9172 chip:

  1. 2 x SATA 6Gb/s connectors (GSATA3 6~7)
  2. Support for RAID 0 and RAID 1

  * Due to system limitation, Intel RAID and Marvell RAID can only use either one.

• USB

  Chipset:

  1. 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
  2. 6 USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

  Chipset + Renesas^® uPD720210 USB 3.0 Hub:

  1. 4 USB 3.0/2.0 ports on the back panel

• Interne I/O Anschlüsse

  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x M.2 PCIe connector
  5. 1 x SATA Express connector
  6. 8 x SATA 6Gb/s connectors
  7. 1 x CPU fan header
  8. 1 x water cooling fan header (CPU_OPT)
  9. 4 x system fan headers
  10. 1 x front panel header
  11. 1 x front panel audio header
  12. 1 x S/PDIF Out header
  13. 1 x USB 3.0/2.0 header
  14. 2 x USB 2.0/1.1 headers
  15. 1 x serial port header
  16. 1 x Clear CMOS jumper
  17. 1 x Trusted Platform Module (TPM) header
  18. 1 x power button
  19. 1 x reset button
  20. 1 x Clear CMOS button
  21. 2 x BIOS switches
  22. Voltage Measurement Points

• Rückseite I/O Panel

  1. 1 x PS/2 keyboard/mouse port
  2. 1 x optical S/PDIF Out connector
  3. 1 x D-Sub port
  4. 1 x DVI-D port
  5. 1 x HDMI port
  6. 6 x USB 3.0/2.0 ports
  7. 2 x USB 2.0/1.1 ports
  8. 2 x RJ-45 ports
  9. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)

• I/O

  1. iTE^® I/O Controller Chip

• H/W Überwachung

  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
     * Whether the fan speed control function is supported will depend on the cooler you install.

• BIOS

  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

• Einzigartige Funktionen

  1. Support for APP Center
     * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
     @BIOS
     EasyTune
     EZ Setup
     Fast Boot
     ON/OFF Charge
     Smart TimeLock
     Smart Recovery 2
     System Information Viewer
     USB Blocker
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install